JPEG 轉 3MF

Invert

預設值关闭

Swap which parts of the image become solid and which become empty. Useful when the background is lighter than the subject.

Threshold

預設值128

範圍0 – 255

Controls the brightness cut-off point that determines which pixels become solid geometry. Lower values include more pixels as solid; higher values only include the darkest areas.

Depth

預設值10

範圍1 – 100

The thickness of the extruded geometry in millimeters. Controls how tall the final 3D model will be.

Bevel

預設值0.5

範圍0 – 5 · step 0.1

Adds rounded edges to the contour shape for a smoother, more polished finish. Higher values create more rounded edges.

倒角分段

預設值3

範圍1 – 8

用於建立倒角曲線的分段數。分段越多倒角越平滑，幾何複雜度也越高。

Angle Protection

預設值0.8

範圍0 – 1 · step 0.1

Preserves sharp corners and fine details by controlling the angle threshold. Lower values protect more detail; higher values smooth more aggressively.

Quality

預設值1

範圍0.1 – 2 · step 0.1

Controls the resolution of the generated mesh. Higher quality produces smoother surfaces but larger file sizes.

Max Height

預設值5

範圍0.5 – 20 · step 0.5

The maximum height of the raised areas in millimeters. Controls the overall relief depth.

Base Thickness

預設值1

範圍0 – 5 · step 0.5

The thickness of the flat base plate beneath the relief. A thicker base provides more stability for printing.

Smooth Level

預設值2

範圍0 – 10

Applies smoothing to the heightmap surface to reduce noise and stair-stepping artifacts. Higher values produce smoother surfaces.

Resolution

預設值400

範圍100 – 400 · step 50

Controls the detail level of the generated mesh. Higher resolution preserves more image detail but increases file size.

Invert

預設值关闭

Swap the height mapping, so brighter areas become recessed and darker areas become raised.